Influence of Amine Structural Characteristics on N-Nitrosamine Formation Potential Relevant to Postcombustion CO2 Capture Systems

Concerns have arisen for the possible contamination of air or drinking water supplies downwind of amine-based CO2 capture facilities by potentially carcinogenic N-nitrosamines formed from reactions between flue gas NOx and amine solvents. This study evaluated the influence of amine structure on the potential to form total N-nitrosamines within the absorber and washwater units of a laboratory-scale CO2 capture reactor, and in the solvent after a pressure-cooker treatment as a mimic of desorber conditions. Among 16 amines representing 3 amine classes (alkanolamines, straight-chain and cyclic diamines, and amino acids), the order of the amine was the primary determinant of total N-nitrosamine formation in the absorber unit, with total N-nitrosamine formation in the order: secondary amines ≈ tertiary amines ≫ primary amines. Similar results were observed upon pressure-cooker treatment, due to reactions between nitrite and amines at high temperature. For secondary and tertiary amines, total N-nitrosamine formation under these desorber-like conditions appeared to be more important than in the absorber, but for primary amines, significant formation of total N-nitrosamines was only observed in the absorber. For diamines and amino acids, total N-nitrosamine accumulation rates in washwaters were lowest for primary amines. For alkanolamines, however, total N-nitrosamine accumulation in the washwater was similar regardless of alkanolamine order, due to the combined effects of amine reactivity toward nitrosation and amine volatility. While total N-nitrosamine accumulation rates in washwaters were generally 1-2 orders of magnitude lower than in the absorber, they were comparable to absorber rates for several primary amines. Decarboxylation of the amino acid sarcosine resulted in the accumulation of significant concentrations of N-nitrosodimethylamine and N-nitrodimethylamine in the washwater.