Absorbent–Adsorbates: Large Amphiphilic Janus Microgels as Droplet Stabilizers

Microgel particles are cross-linked polymer networks that absorb certain liquids causing network expansion. The type of swelling fluid and extent of volume change depends on the polymer-liquid interaction and the network's cross-link density. These colloidal gels can be used to stabilize emulsion drops by adsorbing to the interface of two immiscible fluids. However, to enhance the adsorption abilities of these predominantly hydrophilic gel particles, some degree of hydrophobicity is needed. An amphiphilic Janus microgel with spatially distinct lipophilic and hydrophilic sides is desired. Here, we report the fabrication of poly(ethylene glycol) diacrylate/poly(propylene glycol) diacrylate Janus microgels (JM) using microfluidic drop making. The flow streams of the two separate and immiscible monomer solutions are brought into contact and intersected by a third immiscible fluid in a flow-focusing junction to form Janus droplets. The individual droplets are cross-linked via UV irradiation to form monodispersed microgel particles with opposing hydrophilic and hydrophobic 3D-networked polymer matrices. By combining two chemically different polymer gel networks, an amphiphilic emulsion stabilizer is formed that adsorbs to the oil-water interface while its faces absorb their respective water or hydrocarbon solvents. The resulting water-in-oil emulsions are stabilized and destabilized via a thermal-responsive hydrogel. Stimuli-responsive droplets are demonstrated by adding a short-chain oligo ethylene glycol acrylate molecule to the hydrogel formulation on the Janus microgel particle. Droplets stabilized by these particles experience a sudden increase in droplet diameter around 60 °C. This work with absorbent particles may prove useful for applications in bio catalysis, fuel production, and oil transportation.