锌黄锡矿
材料科学
晶界
兴奋剂
晶粒生长
载流子寿命
光电子学
冶金
粒度
带隙
捷克先令
微观结构
硅
作者
Jongsung Park,Minwoo Lee,Vijay Chandrakant Karade,So Jeong Shin,Hyesun Yoo,Hongjae Shim,Kuldeep Singh Gour,Dongmyung Kim,Jiseon Hwang,Donghyeop Shin,Jan Seidel,Jong H. Kim,Jae Sung Yun,Jin Hyeok Kim
出处
期刊:Solar RRL
[Wiley]
日期:2021-02-20
卷期号:5 (4)
被引量:21
标识
DOI:10.1002/solr.202100020
摘要
Recent efficiency advancements in kesterites have reinforced the use of Cu2ZnSn(S,Se)4 (CZTSSe) in indoor photovoltaic applications. However, the performance of kesterites under low light intensity conditions is mainly hindered by deep‐level defects. In this study, a strategic approach of silver (Ag) and germanium (Ge) cation substitution to cure these defects are employed. The Ag‐doped CZTSSe (CZTSSe:Ag) and Ge‐doped (CZTSSe:Ge) samples experimentally demonstrated a significant improvement in kesterite device performance under all intensities of LED and white fluorescent lamp conditions are prepared. Interestingly, the CZTSSe:Ag device exhibited the highest performance levels, i.e., 1.2–1.5 and 2.5–3 times better than those of Ge‐doped CZTSSe:Ge and undoped CZTSSe, respectively. This improved device performance is mainly attributed to the reduced energy level of deep‐level defects in CZTSSe:Ag. Moreover, these defects assisted in the generation of a larger potential difference between the grain boundary and grain interior in the CZTSSe:Ag sample, attracting minority carriers near the grain boundary. Consequently, the improved carrier separation process reduced the carrier recombination losses and enhanced the power output under low light intensity conditions. This Ag and Ge cation substitution in kesterite is found to be an effective approach to improve the device performance under low light intensity conditions.
科研通智能强力驱动
Strongly Powered by AbleSci AI