光引发剂
生物相容性
材料科学
光刻胶
乙二醇
光致聚合物
聚合
化学工程
单体
高分子化学
聚合物
纳米技术
复合材料
图层(电子)
工程类
冶金
作者
Wenxue Gao,Chao Hao,Yongchao Zheng,Weicai Zhang,Jie Liu,Feng Jin,Xian‐Zi Dong,Yanhong Liu,Shujing Li,Mei‐Ling Zheng
标识
DOI:10.1021/acsami.1c02227
摘要
Two-photon polymerization of a three-dimensional (3D) hydrogel structure has been widely applied in biological tissue engineering. For improving the biocompatibility of hydrogel structures, a new kind of ionic carbazole water-soluble photoinitiator was prepared to realize the fabrication of a 3D hydrogel structure in aqueous phase. 3,6-Bis[2-(1-methyl-pyridinium)vinyl]-9-methyl-carbazole diiodide (BMVMC) and cucurbit[7]uril (CB7) have been employed to generate a complex with better water solubility by host–guest interactions. The binding ratio of the complex was demonstrated to be 1:1 through the characterization of isothermal titration calorimetry (ITC). The two-photon absorption (TPA) cross section of the complex increases to 2500 GM compared with the 750 GM of the BMVMC molecule. Then, an aqueous-phase photoresist was obtained using the CB7/BMVMC complex as the photoinitiator and poly(ethylene glycol) diacrylate (PEGda) as the hydrogel monomer. Two-photon fabrication capability in aqueous phase has been studied using the as-prepared photoresist. A low laser threshold of 3.7 mW as well as a high resolution of 180 nm are achieved. Benefiting from the fluorescence properties of the photoinitiator, we can achieve the confocal fluorescence images without any assistance of fluorescent probes. Subsequently, a 3D engineered hydrogel scaffold microstructure was fabricated by the two-photon polymerization technology, whose biocompatibility was demonstrated by culturing the structure with living cells of L929. The BMVMC–CB7 complex and the as-prepared photoresist are demonstrated to have good biocompatibility, which is prospective for further application in tissue engineering.
科研通智能强力驱动
Strongly Powered by AbleSci AI