控制重构
计算机科学
图像处理
光伏系统
功率(物理)
数字图像处理
计算机视觉
图像(数学)
匹配(统计)
人工智能
算法
实时计算
电子工程
机器视觉
工作(物理)
最大功率原理
热的
作者
Thanikanti Sudhakar Babu,Tangirala Murali Krishna,Devakirubakaran Samithas,Praveen Kumar Balachandran,Belqasem Aljafari
标识
DOI:10.1088/2631-8695/ae2ced
摘要
Partial shading highly impacts the performance of solar photovoltaic (PV) systems that causes power loss. Reconfiguration algorithms are one of the solutions to overcome the consequences of partial shading. The reconfiguration method electrically rearranges the interconnections between the PV modules without altering its physical position. Generally, these methods require higher number of measurement devices for the attainment of reconfiguration pattern. This work proposes a image processing based reconfiguration methods without electrical measurements. Two types of image processing methods such as thermal image processing and tag camera image processing are developed and validated in this work. The proposed work has been validated in both simulation and experimental setup on the 2.4 kW PV system which is constructed using 16 numbers of monocrystalline modules. The validation is done under eleven realistic shading scenarios. The attainment of reconfiguration pattern is compared between both measurement-based reconfiguration and image processing-based reconfiguration. The results are shows that, the image processing attains accurate reconfiguration pattern as same as the measurement-based method. Also, this paper provides a comparative analysis of six proposed reconfiguration methods of Two-Step Reconfiguration (TSR), Couple Matching Algorithm (CMA), Thermal Image Processing-Based Two-Step Reconfiguration (T-TSR), Thermal Image Processing-Based Couple Matching Algorithm (T-CMA), Tag Camera Image Processing-Based Two-Step Reconfiguration (Tag-TSR), and Tag Camera Image Processing-Based Couple Matching Algorithm (Tag-CMA) in terms of power generation, power enhancement ratio, and mismatch losses.
科研通智能强力驱动
Strongly Powered by AbleSci AI