串联
开路电压
钙钛矿(结构)
材料科学
电压
光电子学
带隙
工程物理
电气工程
物理
工程类
化学工程
复合材料
作者
Yekitwork Abebe Temitmie,Muhammad Irfan Haider,Daniele T. Cuzzupè,Lucia Vittoria Mercaldo,Stefan Kraner,Paola Delli Veneri,Amare Benor,Azhar Fakharuddin,Lukas Schmidt‐Mende
标识
DOI:10.1021/acsmaterialslett.4c01699
摘要
High Resolution Image Download MS PowerPoint Slide Narrow-bandgap (NBG) perovskite solar cells based on tin–lead mixed perovskite absorbers suffer from significant open-circuit voltage ( V OC ) losses due primarily to a high defect density and charge carrier recombination at the device interfaces. In this study, the V OC losses in NBG perovskite single junction cells ( E g = 1.21 eV) are addressed. The optimized NBG subcell is then used to fabricate highly efficient all-perovskite tandem solar cells (TSCs). The improvement in the V OC is achieved via the addition of a thin poly(triarylamine) interlayer between the poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS)-based hole transport layer (HTL) and the NBG perovskite. The optimal bilayer HTL results in a champion power conversion efficiency (PCE) of 20.3%, compared to 17.8% of the PEDOT:PSS-based control device. The V OC improvement of the single-junction NBG cell is also successfully transferred to all-perovskite TSC, resulting in a high V OC of 2.00 V and a PCE of 25.1%.
科研通智能强力驱动
Strongly Powered by AbleSci AI