抗弯强度
材料科学
复合材料
弯曲模量
微观结构
脆性
陶瓷
结晶
热稳定性
量子力学
物理
有机化学
化学
作者
Wen Zhang,Xiang Yang,Chen Kun,Ming Huang,Mo Chen,Peng Zhi‐hang
标识
DOI:10.1016/j.ceramint.2022.10.160
摘要
In the paper, the aluminosilicate fiber-reinforced zirconia (AS f /ZrO 2 ) ceramic composites were successfully fabricated by polymer impregnation and pyrolysis (PIP) method. The microstructure and high-temperature mechanical properties of the original composites were well studied. The results revealed that the composites could maintain the stability of microstructure at 1000 °C. The flexural strength increased from 58.82 ± 2.83 MPa to 88.74 ± 6.20 MPa and the flexural modulus increased from 29.26 ± 4.67 GPa to 40.76 ± 8.76 GPa. The thermal exposure improved the interfacial bonding and made the load transfer more effective. After heat treatment from 1200 °C to 1400 °C, the flexural strength gradually declined due to the crystallization of the AS fibers and ZrO 2 matrix, while the flexural modulus increased in a completely different trend. After heat treatment at 1400 °C, the composites could maintain a flexural strength of 66.95 ± 4.24 MPa with a flexural modulus of 60.42 ± 7.25 GPa. But the fracture mode gradually evolved to brittleness.
科研通智能强力驱动
Strongly Powered by AbleSci AI