Hybrid Thermoplastic-Metal joining based on Al/Ni multilayer foils – Analysis of the joining zone

Multi material pairings like metal-plastic hybrid compounds are becoming increasingly important across all industrial sectors. However, the substitution of metals by plastics leads to a multitude of challenges based on the combination of dissimilar materials. The variations in the chemical and physical properties of the used materials require innovative joining processes. The application of reactive multilayers represents an advanced joining method for flexible and low-distortion joining of dissimilar joining partners by means of a short-term and localized application of thermal energy. In the context of this publication, the joining process between semi-crystalline polyamide 6 and austenitic stainless steel X5CrNi18-10(EN 1.4301 / AlSI304) based on reactive Al/Ni multilayers is investigated. In addition to evaluation of resulting joint strength, the focus of the work is in particular the characterization of the resulting failure behavior at the fracture interface under tensile load and the deriving binding mechanisms in the joint. From the results obtained, it is estimated that a direct bond can be generated between plastic and metal despite the presence of a residual reacted foil in the joining area. The structures present in the metal surface have a particularly positive influence on crack initiation and the resulting increased bond strength.