锂(药物)
电化学
离子
亚稳态
过渡金属
相变
二硫化钼
材料科学
相(物质)
阳极
化学物理
化学工程
化学
热力学
冶金
电极
物理化学
医学
有机化学
内分泌学
催化作用
物理
工程类
作者
Xueyang Hou,Wei Zhang,Jiaxin Peng,Lijiao Zhou,Jianchun Wu,Keyu Xie,Zhao Fang
标识
DOI:10.1021/acsaem.2c01835
摘要
Two-dimensional (2D) MoS 2 is one of the most representative materials of the transition metal dichalcogenide (TMD) family, which is mostly studied in the semiconductor 2H and metal 1T phases. However, the properties of the metalloid 1T′ phase remain unclear because of its immature preparation process and thermodynamic instability (metastable state). Herein, this study used theoretical calculations to discover the relationship and conditions for MoS 2 to transition between the 2H, 1T, and 1T′ phases. Meanwhile, charge and discharge voltages and current density were controlled by ion insertion technology, and then 1T′-MoS 2 with large size and definite morphology (the whole process was called “phase transition engineering”) was prepared. The prepared 1T′-MoS 2 was used as the anode material for lithium-ion batteries. Compared with 2H-MoS 2, the cyclic stability and specific capacity of 1T′-MoS 2 were greatly improved. In addition, phase transformation of natural molybdenite (2H-MoS 2 ) by phase transition engineering also yielded promising electrochemical properties. Consequently, phase transition engineering not only provided an opportunity for the phase transformation of TMDs of natural sulfide metals such as molybdenite but also offered an effective method to investigate the properties of 2D metastable polymorphic materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI