铜
材料科学
扫描电子显微镜
电流体力学
欧姆接触
纳米颗粒
纳米技术
基质(水族馆)
导电体
喷射(流体)
硅
体积流量
光电子学
复合材料
电极
冶金
化学
地质学
图层(电子)
物理
热力学
物理化学
海洋学
量子力学
作者
Khalid Rahman,Arshad Khan,Malik Muhammad Nauman,Jeongdai Jo,Kyung Hyun Choi
标识
DOI:10.1088/0960-1317/22/6/065012
摘要
This paper presents the low-cost, fine-resolution printing of conductive copper patterns on silicon substrate. The colloidal solution containing copper nanoparticles is deposited through electrohydrodynamic printing technology. Conductive copper tracks of different width are printed by varying the operating conditions (applied voltage and flow rate) and controlling the jet diameter. The minimum pattern width achieved was approximately 12 µm with the average thickness of 82 nm across the width after the sintering process. The achieved pattern width is five times smaller than the capillary used for patterning. The morphology and purity of the printed copper tracks were analyzed through scanning electron microscopy (SEM), atomic force microscopy (AFM) and x-ray diffraction (XRD). The current–voltage ( I – V ) characteristic of the printed copper tracks showed linear Ohmic behavior and exhibited resistivity ranging from 5.98 × 10 −8 Ω m −1 to 2.42 × 10 −7 Ω m −1 .
科研通智能强力驱动
Strongly Powered by AbleSci AI