A dual-phase crystal plasticity finite-element method for modeling the uniaxial deformation behaviors of thermally aged SAC305 solder

材料科学 纳米压痕 复合材料 共晶体系 焊接 电子背散射衍射 极限抗拉强度 变形(气象学) 有限元法 代表性基本卷 微观结构 结构工程 工程类
作者
Mingwei Xie,Gang Chen,Jingtai Yu,Yuntao Wu,Xiao Liu,Jing Yang,Weiling Xu
出处
期刊:International Journal of Plasticity [Elsevier BV]
卷期号:155: 103342-103342 被引量:53
标识
DOI:10.1016/j.ijplas.2022.103342
摘要

• The eutectic region strength of SAC305 solder decreases with aging by nanoindentation analysis. • The dual-phase RVE CPFEM can simulate aging effect of SAC305 solder. • The simulated strain “hot zones” by DP CPFEM are consistent with SEM-DIC calculation. Because typical solder joints undergo thermal aging during use, models simulating the behaviors of solder under mechanical stress must accurately reflect the changes in properties caused by thermal aging effects. The uniaxial deformation of SAC305 (96.5Sn–3.0Ag–0.5Cu wt.%) solder under different aging conditions indicates that the mechanical properties of solder are weakened with aging. In this study, the nanoindentation method was used to evaluate the effect of aging on the mechanical properties of the β-Sn dendritic regions and eutectic regions of SAC305. Based on this evaluation, a dual-phase (DP) representative volume element (RVE) crystal plasticity finite-element method (CPFEM) model was developed to simulate the thermal aging effects of SAC305 solder. In situ tensile tests performed with scanning electron microscopy (SEM) showed that the tensile deformation was concentrated in the β-Sn dendritic regions of the solder. The DP CPFEM model was established based on the microstructures shown by electron backscatter diffraction (EBSD) analysis performed during the in situ tensile tests. This model was used to verify the accuracy of the DP CPFEM in simulating the deformation localization by comparison with the strain field distribution observed via SEM–digital image correlation (DIC) technology. The developed DP CPFEM model allows the prediction of the potential failure locations of a microscale solder joint.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
SSSYYY完成签到,获得积分10
1秒前
1秒前
Www发布了新的文献求助10
2秒前
催催脆脆鲨完成签到,获得积分10
2秒前
kks569发布了新的文献求助10
3秒前
宇文雨文发布了新的文献求助30
3秒前
简生pro完成签到,获得积分10
4秒前
羊玉林完成签到,获得积分10
5秒前
5秒前
我是老大的应助被yon采纳,获得10
6秒前
燕儿发布了新的文献求助80
6秒前
科研通AI6.4的应助被北辰采纳,获得10
7秒前
小猫完成签到 ,获得积分10
7秒前
8秒前
包子完成签到,获得积分10
8秒前
kanraku的应助被机智的白卉采纳,获得500
9秒前
诚心的洙完成签到 ,获得积分10
9秒前
kk发布了新的文献求助10
10秒前
Ava的应助被xc采纳,获得100
11秒前
田様的应助被xc采纳,获得10
11秒前
小蘑菇的应助被xc采纳,获得10
11秒前
11秒前
11秒前
12秒前
12秒前
彭于晏的应助被隐形煎蛋采纳,获得10
13秒前
13秒前
咕咕发布了新的文献求助10
14秒前
ll完成签到 ,获得积分10
14秒前
超帅李完成签到 ,获得积分10
14秒前
15秒前
陈十三完成签到 ,获得积分10
15秒前
慈祥的马里奥完成签到,获得积分20
16秒前
科研鸟发布了新的文献求助10
16秒前
16秒前
Pan完成签到,获得积分10
16秒前
酷波er的应助被00hello00采纳,获得10
16秒前
17秒前
lieeey发布了新的文献求助10
17秒前
jjjjpp完成签到 ,获得积分10
19秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Agyptische Geschichte der 21.30. Dynastie 510
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
基于界面调控的高效湿气发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8192604
求助须知:如何正确求助?哪些是违规求助? 9579105
关于积分的说明 21863529
捐赠科研通 7792211
什么是DOI,文献DOI怎么找? 3436974
关于科研通互助平台的介绍 2560633
邀请新用户注册赠送积分活动 2483864