Experimental study and numerical simulation of a structural concrete column for building heating integration and energy storage

A steel pipe assemblage is integrated into a structurally reinforced precast concrete column to demonstrate thermal energy storage (TES) and space heating capabilities. This thermal energy column is heated via hot water at varying flow conditions. The system is used as a thermal storage medium, as a means of reducing the demands on the building heat pump, and for regulating the thermal comfort of the building interior environment. The thermal performance of the energy column is examined experimentally and numerically in both charging and discharging phases. Two examples are used to demonstrate the improvements in the operation of building thermal equipment and in the building thermal environment offered by either passive or active discharging of the energy column. Following the conclusion of thermal evaluation, the structural performance of the column under axial compression was evaluated by loading the system to failure. The experiment was paused for visual observation at both the service level and nominal capacity milestones. The longitudinally embedded steel pipes developed comparable strains to the column longitudinal steel reinforcing bars. The structural capacity of the energy column can be accurately predicted using standard concrete design approaches that account for the mechanical influence of the embedded steel pipe assemblage. It is demonstrated that the developed concrete energy column provides a viable option for improving the building thermal energy efficiency and maintaining structural performance.