High-Efficiency Microwave Wireless Power Transmission via Reflective Phase Gradient Metasurfaces and Surface Wave Aggregation

Microwave Wireless Power Transfer (MWPT) technology is crucial for emergency power supply during natural disasters and powering off-grid equipment. Traditional antenna arrays, however, suffer from low energy capture efficiency, difficult impedance matching, complex synthetic networks, and intricate manufacturing processes. This paper introduces a microwave energy receiver design utilizing Reflective Phase Gradient Metasurfaces (R-PGMs) and surface wave energy convergence technology. The design leverages the effective plane wave-to-surface wave conversion capability of R-PGMs to transform incident microwave energy into a surface wave mode, which is then efficiently harvested using a circular energy convergence array before being output to a coupling port. By optimizing R-PGM parameters, an ideal 60° phase gradient distribution is achieved, facilitating the focus of surface wave energy via dispersion characteristics. These components are integrated into a hybrid antenna array, complemented by a matched energy output port structure. Numerical simulations show that this array can efficiently convert microwave energy from plane waves to surface waves, achieving a conversion efficiency of 85.32% and a collection efficiency of 68.26%. Experimental results corroborate these findings, with peak energy collection efficiency reaching 64.68% at 5.8 GHz and an RF-DC conversion efficiency of 42%, confirming the design's efficacy. Compared to conventional methods, this design simplifies the system by avoiding complex combining networks and significantly enhances the efficiency of microwave MWPT.