Air surface crystallization with quenched-in Fe crystallites and associated magnetomechanical properties in Fe–Si–B amorphous ribbons

The effect of surface crystallization on the magnetomechanical properties is studied for amorphous ribbons with a nominal composition of Fe80Si9B11 that are prepared with the single roller melt-spinning method. Our results indicate that the magnetomechanical power efficiency of surface crystallization ribbons is twice as higher as that of its amorphous counterpart. The surface configuration for such ribbons has been investigated through a prism of microstructures and chemical compounds. The surface crystallization with quenched-in α-Fe(Si) crystallites is confirmed by means of x-ray diffraction measurements and the surface polishing process, inducing irregular in-plane domain patterns, which are observed by magneto-optical Kerr effect microscopy. The vibrational absorption peak for polymerized B–O bonds is observed by means of a Fourier transform infrared spectrometer, being ascribed to the presence of pre-precipitated boron atoms from the crystalline film, which is confirmed by x-ray photoelectron spectroscopy. The mechanism that enhances the magnetomechanical power conversion efficiency in FeSiB ribbons with quenched-in crystallites is quite different from the ones with annealing induced “surface-interior” configurations in the previous investigations.