材料科学
合金
微观结构
体积分数
延展性(地球科学)
冶金
热导率
6063铝合金
相(物质)
6111铝合金
镁合金
复合材料
蠕动
有机化学
化学
作者
Lidong Gu,Xiao Qing Shang,Jie Wang,Jun Jun Deng,Yu Peng Liu,Xiaoqin Zeng,Wenjiang Ding
摘要
This paper investigates the influence of Cu addition on the microstructure, mechanical properties, and thermal conductivity of a semi-solid Mg-10Zn alloy produced by Thixomolding process. Microstructure of the Mg-10Zn alloy consists of α-Mg matrix and Mg 2 Zn second phase. The formation of Cu 3 Zn phase was found after the addition of Cu particles. Besides, the volume fraction of solid phase decreased in the Mg-Zn/Cu alloy compared with that of binary Mg-Zn alloy. The yield strength of the alloy was enhanced from 157MPa to 188MPa after Cu addition at the sacrifice of a small amount of ductility. Thermal conductivity, on the other hand, were kept the same level of 115-117 (W/m·K) in the Mg-10Zn alloy and Mg-10Zn/Cu alloy. This work demonstrates the potential for developing Mg alloys with high strength and high thermal conductivity via proper alloy design using Thixomolding process.
科研通智能强力驱动
Strongly Powered by AbleSci AI