Mechanism of Microstructural Alterations of M50 Bearing Steel during Rolling Contact Fatigue under High Loads

Rolling contact fatigue (RCF) of vacuum induction melted–vacuum arc remelted (VIM-VAR) M50 bearing steel under high loads was carried out, using a three-ball-rod RCF tester. Dark etching regions (DER) and butterflies were found in the subsurface region below the raceway of the RCF-tested sample. The DER appeared in the region of maximum shear stress located at a depth of 30 μm to 170 μm below the raceway. Carbon atoms migrated through high-density dislocations, and part of the martensite plates was transformed into cellular ferrites, due to the redistribution of dislocations during the deformation of martensite under the action of cyclic shear stress. Butterflies appeared in the region of maximum shear stress located at a depth of 20 μm to 314 μm below the raceway. Butterflies were initiated in the primary carbides, with length values ranging from 5 μm to 15 μm. The plate martensite in the butterfly wings was transformed into nanocrystalline ferrites, due to the increase in the dislocation density and rearrangement of dislocations during the extension of fatigue cracks from the primary carbides to the matrix under cyclic shear stress.