钴
电极
氧化钴
循环伏安法
介电谱
煅烧
材料科学
扫描电子显微镜
石墨
X射线光电子能谱
冶金
流动电池
化学工程
氧化物
电化学
无机化学
复合材料
化学
催化作用
有机化学
物理化学
工程类
电解质
作者
Hai‐lin Ren,Yang Su,Shuai Zhao,Cheng‐wei Li,Xiao‐min Wang,Bo‐han Li,Zhen Li
标识
DOI:10.1002/celc.202201146
摘要
In this paper, cobalt oxide‐modified graphite felt electrodes were prepared by electrodepositing cobalt nitrate on graphite felt and calcined. The surface morphology of graphite felt modified by cobalt oxide was characterized in detail by scanning electron microscope X‐ray diffraction and X‐ray photoelectron spectroscopy. Shape, microstructure, etc. And using the three‐electrode system to conduct cyclic voltammetry, electrochemical impedance spectroscopy, and single‐cell constant current charge and discharge detection on the graphite felt electrodes modified with different concentrations of cobalt oxide, and study its use as an electrode for iron‐chromium redox flow battery performance. The results show that the method of calcination after electrodeposition successfully attaches cobalt oxide to the graphite felt fiber uniformly in granular form, increases a large number of oxygen‐containing functional groups, and has the highest coulombic efficiency for the first charge‐discharge cycle at a current density of 142mAcm−2 It can reach 82 %, and the charging capacity is also increased by 1.59 times compared with the original graphite felt.
科研通智能强力驱动
Strongly Powered by AbleSci AI