Heterostructure design of one-dimensional ZnO@CoNi/C multilayered nanorods for high-efficiency microwave absorption

Dimensional design and heterogeneous interface engineering are promising approaches for the fabrication of superior absorbers with high loss performance and a wide effective bandwidth. Therein, ZnO nanorods were successfully synthesized and combined with CoNi nanosheets by hydrothermal method, and PDA was then encapsulated on the surface of the material to form a unique one dimensional (1D) core-sheath structure. The extensive defects and residual functional groups are present in the calcined material, as well as the multiple heterogeneous interfaces enhance the dielectric loss induced by polarization. Simultaneously, the 1D structure wrapped with PDA offers an efficient pathway for electron transfer, hence facilitating the enhancement of conductive loss. In addition, the CoNi-LDHs sheet layer stacked on the surface not only causes multiple scattering and reflections of electromagnetic waves, but also provides magnetic losses to optimize the impedance matching. Finally, radar cross section (RCS) simulations further reveal that the composite can dissipate electromagnetic energy in practical applications. Consequently, the 1D multilayer ZnO@CoNi/C composite exhibits an optimal reflection loss of -55 dB with a thickness of 2.3 mm and an effective absorption bandwidth (EAB) value of 6.8 GHz when the filling ratio is only 20 wt%. In summary, this paper provides a new direction for the fabrication of 1D multilayer nonhomogeneous interfacial absorbers with excellent performance.