电解质
阴极
还原(数学)
图层(电子)
化学工程
材料科学
化学
无机化学
电极
纳米技术
物理化学
几何学
数学
工程类
作者
Yonglin Wang,Zhe Huang,Xiguang Gao,Razieh Fazaeli,Yuning Li
出处
期刊:Chemsuschem
[Wiley]
日期:2024-11-08
卷期号:18 (7): e202401599-e202401599
被引量:2
标识
DOI:10.1002/cssc.202401599
摘要
Abstract Organic electrode materials offer a promising alternative for lithium‐ion batteries due to their lower costs, reduced environmental impact, renewability, and high theoretical capacity. Among them, 2,5‐dihydroxy‐1,4‐benzoquinone (DHBQ) is a promising cathode material, but its high solubility in electrolytes leads to rapid capacity degradation of the battery. This study investigates the dilithium salt of DHBQ, Li2DHBQ, as a cathode material for LIBs. Despite its minimal solubility in the electrolyte, Li2DHBQ cathodes suffer rapid capacity decay due to severe morphological damage within the voltage range of 1.5–3.0 V. To achieve morphological stabilization, we promoted the formation of a protective solid electrolyte interphase (SEI) layer on Li2DHBQ particles by lowering the discharge cutoff voltage. Cycling the battery with a 0.5 V discharge cutoff voltage achieved the optimal thickness and organic‐rich composition of the SEI layer, leading to significantly improved morphological stability of Li2DHBQ. Consequently, the battery maintained 170 mAh g−1 with a low decay rate of 0.16 % within a voltage range of 0.5–3.0 V after 200 cycles at 500 mA g−1. Furthermore, initial cycling with a discharge cutoff voltage of 0.5 V for 20 cycles to form an SEI layer, followed by cycling at a normal discharge cutoff voltage of 1.5 V, retained an even higher capacity of 187 mAh g−1 after 200 cycles at 500 mA g−1. These are significant improvements compared to the battery cycled only in the normal range of 1.5–3.0 V, which retained a capacity of 87 mAh g−1. This study demonstrates the effectiveness of forming a cathode SEI layer at low discharge voltages as a new approach to stabilizing organic cathode materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI