Microkinetic Simulations of Methanol-to-Olefin Conversion in H-SAPO-34: Dynamic Distribution and Evolution of the Hydrocarbon Pool and Implications for Catalytic Performance

The dominating hydrocarbon pool species (HCPs) in zeolites for methanol-to-olefin (MTO) conversion have been the subject of intense debate for decades due to the diversity of structures and the complexity of reaction networks. We performed microkinetic simulations in a three-site model to study the MTO conversion in industrially relevant H-SAPO-34 zeolite under a wide range of operating conditions. The energetics of 229 and 342 elementary reaction steps were employed, respectively, in the aromatic-based and olefin-based cycles. The dynamic distribution and evolution of the retained aromatic or olefinic HCPs and the origin of olefin products were revealed with respect to reaction conditions. We corroborate that the olefin-based cycle dominates the MTO conversion in H-SAPO-34 under most reaction conditions, and the contribution of the aromatic-based cycle increase with increasing temperature, decreasing pressure, and/or decreasing water partial pressure. The paring route, dedicated highly to propene formation, prevails in the aromatic-based cycle; the side chain route, favoring exclusively ethene formation, only prevails at extremely lower temperatures, higher pressures, and higher water contents. The inherent activity of each aromatic HCP via the paring cycle increases, while its population retained in H-SAPO-34 usually decreases, with the methylation degree remarkably from tetramethylbenzene to hexamethylbenzene. The contents of higher methylbenzenes increase with decreasing water partial pressure, leading to the enhanced contribution of the aromatic-based cycle. The olefin-based cycle contributes to the formation of both ethene and other olefins, and the product distribution is drastically sensitive to reaction conditions. Ethene predominantly comes from the cracking of C 5 and C 6 species, and propene comes from C 5 to C 7 species. The olefin-based cycle shifts from the interconversion of C 2 –C 7 olefins toward C 2 –C 5 ones with increasing temperature and water partial pressure to enhance ethene formation. Under industrially relevant conditions, the conversion rate of methanol via the olefin-based cycle is 40-fold greater than that via the aromatic-based cycle (6.6 vs 0.15 s –1 ), and the former agrees unexpectedly with the experimental value in low-silica AlPO-34 (7.0 s –1 ). This work thus solves the puzzle of dominating HCPs as a function of reaction conditions in H-SAPO-34 and provides mechanistic insights into the kinetic behaviors, which are the basis for the optimization of the MTO catalyst and process.