哌嗪
腐蚀
碳钢
碱度
材料科学
金属
胺气处理
溶剂
冶金
极化(电化学)
核化学
无机化学
化学
有机化学
物理化学
作者
Liangfu Zheng,James Landon,Naser S. Matin,Zhiao Li,Guojie Qi,Kunlei Liu
出处
期刊:ECS transactions
[Institute of Physics]
日期:2014-09-23
卷期号:61 (20): 81-95
被引量:20
标识
DOI:10.1149/06120.0081ecst
摘要
The corrosion behavior of A106 carbon steel in 30 wt.% piperazine (PZ, a cycling amine) solutions was investigated by potentiodynamic polarization, EIS, LPR, SEM/EDS, and XRD. For comparison, the corrosion was also conducted in the benchmark solvent of monoethanolamine (MEA) solution. Similar to MEA, initial corrosion testing results in PZ solvent showed that the corrosion rate increases with increases either in CO 2 loading from 0.23 to 0.43 mol CO 2 /mol alkalinity (C/N) or in temperature from 20 to 80 o C. Short term corrosion investigations showed an approximately two orders of magnitude lower corrosion rate for A106 in 0.43 C/N CO 2 loaded 30 wt.% PZ at 80 o C than in the same conditions but with 30 wt.% MEA. The difference was due to the ability to form a dense and protective FeCO 3 layer on the metal surface in PZ as opposed to in MEA solutions. Possible mechanisms are discussed.
科研通智能强力驱动
Strongly Powered by AbleSci AI