热重分析
聚合物
材料科学
结晶度
水泥
化学工程
成核
动态光散射
粒径
降水
纳米颗粒
复合材料
化学
纳米技术
有机化学
物理
工程类
气象学
作者
Fang Wang,Xiangming Kong,Dongmin Wang,Qibao Wang
摘要
Abstract A promising approach to accelerate cement hydration known as “seeding technology” has been discovered using nano‐particles to provide additional nucleation sites for growing of C‐S‐H. Two different types of polymer, polycarboxylate (PCE) and polysulfonate (PSE) were used as stabilizer to synthesize nano‐C‐S‐H via co‐precipitation process. The obtained C‐S‐H‐polymer composites were characterized by means of XRD, FTIR, thermogravimetric analysis (TGA), TEM, dynamic laser scattering (DLS), and BET. DLS measurement shows that the particle size of the obtained C‐S‐H‐polymer suspension ranges from 82.6 to 589.9 nm. The results of DLS and BET show that the particle size of the C‐S‐H particles synthesized using PCE polymer as stabilizer is smaller than those synthesized with PSE polymer, and hence the specific surface area is much higher. FTIR and TGA results confirm the presence of the polymers in the obtained C‐S‐H composites particles. XRD results indicate that the presence of the polymers reduces the crystallinity of C‐S‐H due to the absence of the d002 peak at 2 θ of 7°. The calorimetry results show that the main hydration peak of cement is dramatically increased by the addition of the C‐S‐H‐polymer composites. It is interestingly found that the acceleration effect of the C‐S‐H‐polymer composites is linearly proportional to the total surface area of the nanoparticles introduced into the cement pastes. At the same time, it is found that the secondary hydration peak, usually known as the sulfate‐depletion peak, is greatly advanced by addition of the C‐S‐H nano‐particles in comparison with the blank cement paste. The acceleration effect of the nano‐C‐S‐H is further verified in a pure C 3 S system.
科研通智能强力驱动
Strongly Powered by AbleSci AI