异质结
光电流
分解水
材料科学
带材弯曲
光电子学
半导体
带隙
X射线光电子能谱
带偏移量
表面光电压
光电化学
分析化学(期刊)
光谱学
化学
价带
光催化
催化作用
电化学
电极
化学工程
物理
生物化学
物理化学
量子力学
工程类
色谱法
作者
Rajiv Ramanujam Prabhakar,Thomas Moehl,Sebastian Siol,Jihye Suh,S. David Tilley
标识
DOI:10.1021/acs.chemmater.0c01581
摘要
Antimony sulfide (Sb 2 S 3 ) is a promising light-absorbing semiconductor for photovoltaic applications, though it remains vastly unexplored for photoelectrochemical water splitting. Sb 2 S 3 was synthesized by a simple sulfurization of electrodeposited antimony metal at relatively low temperatures (240–300 °C) with elemental sulfur. Using a TiO 2 buffer layer and a platinum co-catalyst, photocurrent densities up to ∼9 mA cm –2 were achieved at −0.4 V vs RHE in 1 M H 2 SO 4 under one sun illumination. Using X-ray photoelectron spectroscopy band alignment studies and potential-dependent incident photon-to-current efficiency measurements, a conduction band offset of 0.7 eV was obtained for the Sb 2 S 3 /TiO 2 junction as well as an unfavorable band bending at the heterointerface, which explains the low photovoltage that was observed (∼0.1 V). Upon inserting an In 2 S 3 buffer layer, which offers a better band alignment, a 0.15 V increase in photovoltage was obtained. The excellent photoelectrochemical water splitting performance and the identification of the origin of the low photovoltage of the Sb 2 S 3 photocathodes in this work pave the way for the further development of this promising earth-abundant light-absorbing semiconductor for solar fuel generation.
科研通智能强力驱动
Strongly Powered by AbleSci AI