催化作用
选择性
氮氧化物
化学
铜
无机化学
吸附
氨
X射线光电子能谱
选择性催化还原
X射线吸收精细结构
金属
氮气
化学工程
光谱学
物理化学
有机化学
燃烧
工程类
物理
量子力学
作者
Magdalena Jabłońska,Andrew Michael Beale,Marek Nocuń,Regina Palkovits
标识
DOI:10.1016/j.apcatb.2018.03.029
摘要
XRD, BET, H2-TPR, UV–vis-DRS, XPS and XAFS were used to characterize a series of Ag and/or Cu – Ag (1–5%), Cu (10–15%) or Ag-Cu (1–1, 1–10, 1.5–10, 5–5% of metal) – supported on γ-Al2O3. Correlation between physicochemical properties, catalytic activity and selectivity in NH3-SCO were thoroughly investigated. Silver species mainly in the form of Ag2O on the Ag/Al2O3 catalysts led to enhanced activity together with drop in N2 selectivity with increasing silver loading up to 5%. A mixture of CuO and CuAl2O4 formed on the Cu/Al2O3 catalysts. Easily reducible highly dispersed CuOx promoted the activity of the catalysts, while bulk CuOx and CuAl2O4 decreased N2 selectivity up to 500 °C. The activity of all Cu-containing materials was inferior to Ag-containing ones. Thus, the gap between the high conversion temperature over Cu/Al2O3 and low N2 selectivity over Ag/Al2O3 was bridged by applying the Ag-Cu/Al2O3 catalysts, with the optimum loading of 1.5 and 10 wt.% for silver and copper, respectively. NH3-TPD, NH3-TPSR and in situ FTIR were used to determine the in situ selective catalytic reduction (i-SCR) mechanism over 1.5% Ag/Al2O3, 10% Cu/Al2O3 and 1.5% Ag-10% Cu/Al2O3 respectively. The i-SCR mechanism involved the partial oxidation of NH3 into NOx species, along with adsorbed NOx species interacting with adsorbed ammonia (NHx species) and being reduced to reaction products.
科研通智能强力驱动
Strongly Powered by AbleSci AI