蜂鸣器
扫描仪
材料科学
悬臂梁
电压
总谐波失真
压电
信号(编程语言)
原子力显微镜
声学
光学
电气工程
物理
纳米技术
计算机科学
工程类
复合材料
程序设计语言
警报
作者
Weimin Wang,Kuang‐Yuh Huang,Hsuan-Fu Huang,Ing‐Shouh Hwang,En‐Te Hwu
出处
期刊:Nanotechnology
[IOP Publishing]
日期:2013-10-18
卷期号:24 (45): 455503-455503
被引量:24
标识
DOI:10.1088/0957-4484/24/45/455503
摘要
In this paper we present a novel scanner design in a quad-rod actuation structure, actuated by piezoelectric disk buzzers, and a new type of atomic force microscope (AFM), which uses this buzzer-scanner and a compact disk/digital-versatile-disk astigmatic optical pickup unit (OPU) for the detection of cantilever movements. Commercially available piezoelectric disk buzzers have a low capacitance and can be driven by low-voltage signal sources, such as analog outputs from a data acquisition card, without additional voltage or current amplifiers. Various scanning ranges can be realized through changing the dimensions of the actuation structure and/or the choice of disk buzzer. We constructed a buzzer-scanner and evaluated its performance. The scanner had a scanning range of 15 μm in the X and Y directions and an actuation range of 3.5 μm on the Z axis, with nonlinearity of 2.11%, 2.73%, and 2.19% for the X,Y and Z axes, respectively. The scanner had a resonance frequency of approximately 360 Hz on the X and Y axes, and 4.12 kHz on the Z axis. An OPU-AFM with this buzzer-scanner can resolve single atomic steps of a graphite substrate with a noise level of 0.06 nm. The obtained topographic images exhibit much less distortion than those obtained with an AFM using a piezoelectric tube scanner.
科研通智能强力驱动
Strongly Powered by AbleSci AI