清晨好,您是今天最早来到科研通的研友!由于当前在线用户较少,发布求助请尽量完整地填写文献信息,科研通机器人24小时在线,伴您科研之路漫漫前行!

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS

偷看 材料科学 复合材料 聚醚醚酮 ABS树脂 极限抗拉强度 熔融沉积模型 乙醚 聚合物 3D打印 有机化学 化学
作者
Wenzheng Wu,Peng Geng,Guiwei Li,Di Zhao,Haibo Zhang,Ji Zhao
出处
期刊:Materials [Multidisciplinary Digital Publishing Institute]
卷期号:8 (9): 5834-5846 被引量:830
标识
DOI:10.3390/ma8095271
摘要

Fused deposition modeling (FDM) is a rapidly growing 3D printing technology. However, printing materials are restricted to acrylonitrile butadiene styrene (ABS) or poly (lactic acid) (PLA) in most Fused deposition modeling (FDM) equipment. Here, we report on a new high-performance printing material, polyether-ether-ketone (PEEK), which could surmount these shortcomings. This paper is devoted to studying the influence of layer thickness and raster angle on the mechanical properties of 3D-printed PEEK. Samples with three different layer thicknesses (200, 300 and 400 μm) and raster angles (0°, 30° and 45°) were built using a polyether-ether-ketone (PEEK) 3D printing system and their tensile, compressive and bending strengths were tested. The optimal mechanical properties of polyether-ether-ketone (PEEK) samples were found at a layer thickness of 300 μm and a raster angle of 0°. To evaluate the printing performance of polyether-ether-ketone (PEEK) samples, a comparison was made between the mechanical properties of 3D-printed polyether-ether-ketone (PEEK) and acrylonitrile butadiene styrene (ABS) parts. The results suggest that the average tensile strengths of polyether-ether-ketone (PEEK) parts were 108% higher than those for acrylonitrile butadiene styrene (ABS), and compressive strengths were 114% and bending strengths were 115%. However, the modulus of elasticity for both materials was similar. These results indicate that the mechanical properties of 3D-printed polyether-ether-ketone (PEEK) are superior to 3D-printed ABS.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
lili完成签到 ,获得积分10
1秒前
文海泛舟完成签到,获得积分10
3秒前
幸福的沛萍完成签到,获得积分10
12秒前
美好的泽洋完成签到 ,获得积分10
14秒前
fangyuan完成签到,获得积分10
15秒前
kevin完成签到,获得积分10
21秒前
码头完成签到 ,获得积分10
28秒前
鹰少完成签到,获得积分10
29秒前
沉静友蕊完成签到,获得积分10
33秒前
小美美完成签到 ,获得积分10
39秒前
Kelly完成签到,获得积分10
41秒前
六一儿童节完成签到 ,获得积分0
43秒前
科研通AI6.3的应助被aaa采纳,获得10
53秒前
种下梧桐树完成签到 ,获得积分10
59秒前
黄景滨完成签到 ,获得积分10
1分钟前
欢喜的晓槐完成签到,获得积分10
1分钟前
文2026完成签到 ,获得积分10
1分钟前
1分钟前
如意2023完成签到 ,获得积分10
1分钟前
奈思完成签到 ,获得积分0
1分钟前
rjy完成签到 ,获得积分10
1分钟前
aaa发布了新的文献求助10
1分钟前
自由书白完成签到,获得积分10
1分钟前
BOB完成签到 ,获得积分10
1分钟前
zwyingg完成签到 ,获得积分10
1分钟前
仁爱的鞋子完成签到,获得积分10
1分钟前
玩命的怀绿完成签到,获得积分10
1分钟前
t铁核桃1985完成签到 ,获得积分0
1分钟前
一一完成签到 ,获得积分10
1分钟前
aaa完成签到,获得积分10
1分钟前
润润润完成签到 ,获得积分0
1分钟前
1分钟前
青己完成签到 ,获得积分10
1分钟前
时迁完成签到 ,获得积分10
1分钟前
leng发布了新的文献求助10
1分钟前
ZZZ完成签到 ,获得积分10
1分钟前
加点辣椒面吧完成签到,获得积分10
2分钟前
陌桑子完成签到 ,获得积分10
2分钟前
勤劳的碧空完成签到 ,获得积分10
2分钟前
失眠的保温杯完成签到,获得积分10
2分钟前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
Social Psychology in the Real World 600
八旗制度の研究 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8180051
求助须知:如何正确求助?哪些是违规求助? 9570224
关于积分的说明 21808628
捐赠科研通 7776034
什么是DOI,文献DOI怎么找? 3433261
关于科研通互助平台的介绍 2557405
邀请新用户注册赠送积分活动 2478998