Mullite bonded corundum refractory was synthesized by the reaction sintering technique and using tabular corundum as the aggregate and mullite as the bonding phase,and silica powders and silica sol were used as the SiO2 sources.The results show that the microstructure and properties of the refractory prepared using silica sol to partially substitute for silica powders as the SiO2-containing raw material can be improved;for example,the formation of mullite is accelerated,the uniformity and density are enhanced,and the strength and the high temperature creep resistance are improved.Compared with the sample using silica powders as the raw material,the room temperature and high temperature flexural strengths of the sample sintered at 1 550 ℃ using silica sol to replace 4%(in mass)silica powders are 40.16% and 29.92% higher,respectively,and the high temperature creep rate of the sample is 71% lower for the sample sintered at 1 650 ℃.The load-flexivity curves of the samples show that the fracture behavior of mullite bonded corundum refractory at room temperature is gradual,and adding silica sol can improve the fracture toughness of the refractory.