材料科学
金属间化合物
纳米压痕
冶金
合金
微观结构
固溶强化
钼
体积分数
粒度
硬化(计算)
铝化钛
钛合金
复合材料
图层(电子)
作者
Boryana Rashkova,Krystina Spiradek-Hahn,Manfred Brabetz,Zaoli Zhang,Thomas Schöberl,Helmut Clemens,Svea Mayer
出处
期刊:International Journal of Materials Research
[De Gruyter]
日期:2015-04-21
卷期号:106 (7): 725-731
被引量:21
摘要
Abstract As a strong β-stabilizing alloying element, Mo has gained importance for intermetallic β/γ-TiAl alloys. In general, TiAl alloys containing a significant volume fraction of the disordered body-centered cubic β-phase exhibit improved processing characteristics during hot-working. To increase the understanding of the alloying effect of Mo, a model alloy with the chemical composition Ti-44Al-7Mo-0.1B (in at.%) was investigated. In this work, the microstructural evolution after individual heat-treatment steps was studied by means of scanning as well as conventional and in-situ transmission electron microscopy. Additionally, macro-hardness and nanoindentation measurements were conducted to study the change in hardness due to grain refinement and solid-solution hardening. The variation of the observed macro- and nano-hardness corresponds well with the microstructural evolution. The obtained grain refinement effect leads to a significant increase in the macro-hardness, whereas the increase in the average nano-hardness of the individual phases is related to solid-solution hardening.
科研通智能强力驱动
Strongly Powered by AbleSci AI