Tool path generation for triangular meshes using least-squares conformal map

Tool path generation is an interesting and challenging task in free-form surface machining. Iso-planar tool path generation is one of the common approaches to dealing with this task. However, it suffers from an inherent drawback that intersecting intervals of the iso-planar method are limited to surface geometric features. This results in poor machining efficiency in flat regions due to redundant machining paths. For this problem, a new tool path generation method for triangular meshes is proposed based on the least-squares conformal map (LSCM). After LSCM parameterisation with minimal stretching energy, the triangular meshes are unfolded on a plane, where the principal component analysis (PCA) technique is employed to determine a suitable drive line for calculating cutter contact paths by the iso-planar strategy. Therefore, the tool paths are generated in a plane and the unevenness of the traditional iso-planar method is improved. The feasibility and effectiveness of the developed method is demonstrated through a test experiment.