共聚物
高分子化学
化学
苯乙烯
一氧化氮介导的自由基聚合
乙二醇
聚合
分散性
丙烯酸甲酯
丙烯酸酯
二甲基甲酰胺
摩尔质量分布
自由基聚合
聚合物
有机化学
溶剂
作者
Benoit Hugo Lessard,Milan Marić
出处
期刊:Macromolecules
[American Chemical Society]
日期:2008-10-16
卷期号:41 (21): 7870-7880
被引量:64
摘要
The kinetics of poly(ethylene glycol) acrylate (PEGA) nitroxide-mediated polymerization in bulk were studied at two temperatures (115 and 125 °C) and at initial molar ratios r = 0.05−0.21 of added free nitroxide ( N - tert -butyl- N -[1-diethylphosphono-(2,2-dimethylpropyl)] nitroxide (SG1) relative to the unimolecular initiator 2-methyl-2-[ N - tert -butyl- N -(diethoxylphosphoryl-2,2-(dimethylpropyl)aminooxy]propionic acid (BlocBuilder) ( r = [SG1] 0 /[BlocBuilder] 0 ). Bulk polymerizations were more controlled at 115 °C with r = 0.10−0.21 giving polymers with polydispersity indices ( M̅ w / M̅ n ) as low as 1.17 and a linear increase in number average molecular weight M̅ n with conversion up to about 50%. The k p K values ( k p = propagation rate constant, K = equilibrium constant) for PEGA at 115 °C were 1.9 × 10 −5 s −1 to 2.9 × 10 −5 s −1 and at 125 °C were 6.7 × 10 −5 to 8.3 × 10 −5 s −1 . PEGA polymerizations in dimethylformamide (DMF) or anisole solution were most controlled when conducted in 25 wt % solutions, r ∼ 0.15 and lower temperatures (95−115 °C) but side reactions were prevalent and control was not significantly better than in bulk. Chain extension of a comb-like poly(PEGA) (PPEGA, M̅ n = 8.1 kg/mol, M̅ w / M̅ n = 1.20) with styrene in 50 wt % DMF solution at 115 °C to produce a PPEGA−poly(styrene) (PPEGA−PS) block copolymer indicated sufficient “livingness” of the PPEGA chain ends as observed by the steady increase in M̅ n and monomodal molecular weight distribution as determined by size exclusion chromatography although some broadening of the molecular weight distribution was evident ( M̅ n = 62.3 kg/mol and M̅ w / M n = 1.53). 1 H NMR spectroscopy revealed resonances corresponding to the styrenic and PEGA segments and differential scanning calorimetry revealed two distinct glass transition temperatures T g indicative of the PPEGA ( T g ≈ −70 °C) and PS ( T g ≈ 98 °C) segments.
科研通智能强力驱动
Strongly Powered by AbleSci AI