材料科学
电化学
锂(药物)
重量分析
阴极
磷酸钒锂电池
锰
氧化钴
镍
化学工程
粒径
钴
无机化学
分析化学(期刊)
冶金
电极
化学
物理化学
内分泌学
有机化学
工程类
医学
色谱法
作者
Mayu Shiozaki,Hiroki Yamashita,Yuko Hirayama,Takaaki Ogami,Kiyoshi Kanamura
出处
期刊:Electrochemistry
[The Electrochemical Society of Japan]
日期:2023-06-12
卷期号:91 (7): 077007-077007
被引量:20
标识
DOI:10.5796/electrochemistry.23-00033
摘要
The effects of LiMn0.7Fe0.3PO4/C (LMFP) species on the electrochemical performance of the blended cathodes of LiNi0.5Mn0.3Co0.2O2 (NMC) and LMFP are examined. Two types of LMFPs are synthesized by the hydrothermal method (LMFP-1) and the solid-state reaction (LMFP-2) leading to different physical characteristics and uniformity of primary particles. The blended cathodes of NMC and LMFP-1 show higher discharge capacity, gravimetric energy density, and rate capability than those of NMC and LMFP-2 for the same blending ratio (10, 20, 30, 40, and 50 wt.% LMFP to NMC) because of the differences in the electronic conductivity, specific surface area, mean particle size, and uniformity of primary particles between LMFP-1 and LMFP-2. The discharge capacity and gravimetric energy density of NMC:LMFP-1 = 9:1 and 8:2 at 0.2 C rate are comparable to those of NMC. Further, the rate capability is the highest at the blending ratio of NMC:LMFP-1 = 7:3. An optimal range for the blending ratio of LMFP to NMC is revealed based on the discharge capacity, energy density, and rate capability of the blended cathode. Moreover, LMFP has a considerable impact on the electrochemical characteristics of the blended cathodes of NMC and LMFP.
科研通智能强力驱动
Strongly Powered by AbleSci AI