Polymers Containing Diethylsiloxane Segment and Active Functional Group by Ring-Opening Polymerization of Hexaethylcyclotrisiloxane under the Catalysis of Linear Chlorinated Phosphazene Acid

Linear chlorinated phosphazene acid is prepared using PCl5 and NH4Cl as raw materials. Using hexaethylcyclotrisiloxane as the monomer, 1,1,3,3-tetramethyldisiloxane or 1,3-divinyl-1,1,3,3-tetramethyldisiloxane as the end-capping agent, and linear chlorinated phosphazene acid as the catalyst, polydiethylsiloxane oligomers terminated with active Si-H or Si-CH=CH2 groups have been prepared. Using hexaethylcyclotrisiloxane and 1,3,5,7-octamethylcyclotetrasiloxane as comonomers, 1,1,3,3-tetramethyldisiloxane or hexamethyldisiloxane as the end-capping agent, or using hexaethylcyclotrisiloxane and octamethylcyclotetrasiloxane as comonomers, 1,1,3,3-tetramethyldisiloxane as the end-capping agent, copolymers containing active Si-H bonds and dimethylsiloxane segments have been prepared under the catalysis of linear chlorinated phosphazene acid. The effects of catalyst dosage, reaction temperature, reaction time, end-capping agent, and polymerization monomer dosage on polymer yield and structure were investigated. Using 300 ppm of linear chlorinated phosphazene acid, oligomers and copolymers containing an active Si-H bond and diethylsiloxane segment were prepared under mild conditions. The molecular weight of the obtained polymers was close to their designed values, but their PDI values were small. The highest yield of α, ω-bisdimethylsiloxyl-terminated PDES oligomers reached 93%. Using oligomers and copolymers containing Si-H bonds and diethylsiloxane segments as crosslinkers, a silicone gel containing diethylsiloxane segments was prepared by hydrosilylation reaction. With the introduction of a diethylsiloxane segment, the glass transition temperature of the silicone gel decreased relative to that of the PDMS oligomer, but the temperature at 5% weight loss in nitrogen atmosphere decreased from 347 °C to 312 °C. The mechanism of the ring-opening polymerization of hexaethylcyclotrisiloxane catalyzed by linear chlorinated phosphazene acid is also discussed.