材料科学
电镀
铜
封装(网络)
复合材料
铜线
临界电流
电流(流体)
冶金
超导电性
计算机科学
热力学
计算机网络
物理
图层(电子)
量子力学
作者
Zuoguang Li,Shaoqing Wei,Jiulong Zhang,Yuhu Bu,Donghu Wang,Guanyu Xiao,Huan Jin,Jinggang Qin,Chao Zhou,Zhan Zhang
标识
DOI:10.1088/1361-6668/adbec4
摘要
Abstract The use of laser cutting technology to subdivide the superconducting layer of commercial REBCO tapes into narrow and parallel filaments, resulting in a multi-filamentary tape that can significantly decrease shielding currents and AC losses, while effectively maintaining the critical current (IC). In order to prevent the superconducting layer in the prepared REBCO multi-filamentary tapes from hydrolysis reaction with water when directly exposed to air, leading to the degradation of superconducting properties. Therefore, re-encapsulation is necessary to the REBCO multi-filamentary tapes. This research involved the re-encapsulation of filament wire tapes with varying filament counts (2-filament, 6-filament, and 10-filament) using a reel-to-reel copper plating device, along with relevant performance validation. The results show that when the copper plating thickness on one side is 10 μm, the grooves generated during laser cutting (where the groove width × groove height = 20 μm × 30 μm) have been basically filled. Meanwhile, the current-carrying performance of the REBCO multi-filamentary tapes encapsulated with copper plating again was tested at different temperatures and magnetic fields, and no further reduction of the critical current was found. In addition, the mechanical properties of REBCO multi-filamentary tapes before and after electroplated copper re-encapsulation at room temperature and in the liquid nitrogen temperature.were verified It is found that the mechanical properties of the multi-filamentary tape after laser cutting are not attenuated significantly compared with the commercial tape without cutting. In addition, the mechanical properties of the multi-filamentary tape after re-encapsulation were significantly improved, especially under low-temperature conditions.
科研通智能强力驱动
Strongly Powered by AbleSci AI