二氧化碳重整
镍
甲烷
机制(生物学)
材料科学
化学工程
甲烷转化炉
催化作用
工艺工程
环境科学
化学
废物管理
作者
Bohan Chen,Yue Feng,Zhijie Liu,Yuting Gao,Xuewen Zhao,Xin Li,Tianyu Li,Dingwei Gan,Rusen Zhou,Rusen Zhou,Liangping Xiao,Jinying Zhang,Xin Tu,Renwu Zhou,Renwu Zhou
标识
DOI:10.1021/acs.iecr.5c03472
摘要
Plasma-catalytic dry reforming of methane (DRM) enables the simultaneous mitigation of greenhouse gases and the production of value-added chemicals; however, achieving a high conversion efficiency alongside controlled product selectivity remains challenging. Here, a water-grounded dielectric barrier discharge (DBD) reactor integrated with nickel foam (NF)-supported transition-metal catalysts (NiAl/NF, CoAl/NF, CuAl/NF) was employed to investigate CO 2 and CH 4 conversion and elucidate reaction mechanisms. Combined in situ FTIR, physicochemical characterization, and plasma diagnostics revealed that the release of lattice oxygen and its reaction with CH x intermediates are pivotal for catalytic enhancement. NiAl/NF delivered 33.8 and 30.1% higher CO 2 and CH 4 conversion, respectively, over plasma-only discharge, accompanied by a 91.3% increase in total liquid product selectivity. Selective methanol formation reached 4.0% (74.6% higher than plasma-only), while CoAl/NF achieved 10.4% acetic acid selectivity (96.7% higher). Mechanistic analysis indicated that excessive bidentate carbonate accumulation can suppress reaction pathways, underscoring the decisive role of the catalyst structure and active sites. This work demonstrates that tailoring active metal species enables targeted oxygenate synthesis in low-temperature plasma DRM, providing both mechanistic insight and a practical strategy to optimize the conversion efficiency and selectivity.
科研通智能强力驱动
Strongly Powered by AbleSci AI