非阻塞I/O
阴极
涂层
材料科学
离子
化学工程
纳米技术
化学
物理化学
有机化学
工程类
催化作用
作者
L.A. Benavides,Mario Sergio Moreno,D.J. Cuscueta
标识
DOI:10.1016/j.mseb.2022.115775
摘要
Crystalline LiCoO 2 nanoparticles were coated with NiO nanocrystals. The coating was made using a one-pot strategy by solution combustion synthesis with different weight percentages. The method used is simple, economical, and easily scalable. The resulting materials were characterized morphologically, structurally, and electrochemically by transmission and scanning electron microscopy, charge/discharge cycles, rate capability, voltammetry, and electrochemical impedance spectroscopy techniques. The results showed that a uniform coating with crystalline NiO nanoparticles on the LiCoO 2 was obtained. For optimal coating, the discharge capacity reached 74 % retention after 100 cycles between 3.0 and 4.5 V at 0.1 C, while the uncoated material retained only 5 % of its initial capacity. Thus, the introduced NiO coating protects the LiCoO 2 electrode against the unwanted reactions that occur in contact with the electrolyte at high voltage. Therefore, the irreversible loss of the active material capacity will be minimized. • Simple, time- and energy-saving method for surface coating using a liquid method. • Electrochemical characterization of LiCoO 2 coated with NiO crystalline nano-particles. • Enhanced 4.5 V cycling performance of LiCoO 2 cathode via NiO coating. • NiO coating layer prevents electrode–electrolyte side reactions.
科研通智能强力驱动
Strongly Powered by AbleSci AI