Microstructure- and Surface-Modified Ni-Rich Layered Cathode for High-Energy All-Solid-State Batteries
作者
Tae‐Yeon Yu,Un‐Hyuck Kim,Jin wook Lee,Yang‐Kook Sun
出处
期刊:Meeting abstracts [Institute of Physics] 日期:2023-12-22卷期号:MA2023-02 (4): 801-801
标识
DOI:10.1149/ma2023-024801mtgabs
摘要
Li-ion batteries, which have been widely commercialized in the portable electronic devices and electric vehicles, pose a potential safety risk because the flammable liquid electrolyte can cause explosions under certain conditions. All-solid-state batteries (ASSBs) are promising candidates due to the potentially improved safety as well as high energy density. However, realizing high energy density ASSBs by employing Ni-rich layered cathode is difficult because of the microcrack with detrimental volume contraction near charge end as well as side reaction with solid electrolytes (SE). To overcome these limitations, this study show that the simultaneous boron doping and coating of a Ni-rich Li[Ni0.9Co0.05Mn0.05]O2 (NCM90) cathode, which modifies the cathode microstructure and protects cathode-SE interface, respectively, afford an ASSB that demonstrates an initial discharge capacity of 214 mAh g-1 and cycles stably 300 cycles with minimal capacity fading. The proposed dual treatment of the NCM90 cathode offers a viable approach to realizing a high energy density ASSBs with long cycle life by fracture-toughening the Ni-rich cathode and constructing a mechanically and chemically robust cathode-SE interface.