Plant extracts as an eco-friendly approach to remove paraquat from aqueous solution

Nowadays, water pollution by herbicides is known as a global concern. Paraquat (PQ) (1-1-methyl-4,4-bi-pyridinium-dichloride) is a chip with high performance, which is being widely used herbicide to remove weeds from agricultural and natural ecosystems. PQ can contaminate water sources due to its high solubility in water. Human death by poisoning effects of PQ has been reported in several countries. Therefore, the side effects of PQ are a global challenge. This study aimed to investigate the bioremediation of PQ by plant extracts, as a low-cost, nontoxic, and natural absorbent to remove PQ from aqueous solutions in different conditions. In this regard, the extracts of common purslane (portulaca oleracea), florist kalanchoe (kalanchoe blossfeldiana), and jade plant (crassula portulaca) were used as adsorbents. For this purpose, the effect of various parameters such as contact time, initial concentration of PQ solution, temperature, pH, and amount of extract was investigated. The results of present study showed that P. oleracea extract and C. portulaca extracts have higher adsorption efficiency than k. blossfeldiana extract. The highest PQ removal was obtained by P. oleracea extract (79.04%) and C. portulaca extract (78.72%) at pH = 11, the adsorbent content of 0.2 mg L−1, and the lowest absorption of PQ (50.6%) was obtained by K. blossfeldiana extract. The highest PQ removal by plant extract was observed at 30 min for P. oleracea and C. portulaca, and at 15 min for k. blossfeldiana extract. Moreover, surface absorption capacity increased with increasing plant extract concentration, decreasing PQ concentration and decreased with increasing temperature. Finally, it can be concluded that plant extract can help to remove PQ from the aqueous solution.