Fabrication and characterization of W1/O/W2 double emulsions stabilized with Pleurotus geesteranus protein particles via one-step emulsification

In this study, Pleurotus geesteranus protein isolate (PPI) with low solubility in water was fabricated into nanoparticle (PPIP) that can be uniformly dispersed in pH 7.0 aqueous solution using pH cycle method. PPIP with a zeta potential of −19.21 mV had a mean size of 250.53 nm and two main peaks in particle size distribution profile. This was consistent with the TEM results, which existed both as individual particles and as particle aggregates. The main force responsible for maintaining the structure of protein particles was hydrogen bonding. Interestingly, these protein particles were successfully utilized to fabricate W1/O/W2 double emulsions using one-step homogenous emulsification, and the formation and properties of PPIP-stabilized W1/O/W2 double emulsions were significantly influenced by the protein particle concentration, oil content, and salt concentration in W2 continuous phase. Specifically, higher particle concentration and salt concentration caused a reduction in the number of W1/O droplets and the size of oil droplets. Conversely, an increase in oil content increased the number of W1/O droplets primarily due to the augmentation in the size of oil droplets. The gel strength of double emulsions was enhanced with particle concentration and oil content, as this led to the formation of stronger particle networks and droplet networks. While an opposite phenomenon was found in increasing salt concentration in W2 continuous phase, possibly resulting from the disruption of the ordered gel network. These findings not only provide new food-grade emulsifiers for W1/O/W2 double emulsions, but also broaden the application of edible mushroom proteins in food industry.