Thermophilic helicase-dependent amplification-based CRISPR/Cas12a system: Detection of stx2 in Escherichia coli O157:H7 by controlling primer dimers

s: To overcome the limitation of polymerase chain reaction (PCR), isothermal amplification methods such as thermophilic helicase-dependent amplification (tHDA) have been developed. However, formation of primer dimer due to the single amplification temperature are major problems of tHDA. When cross-dimerization of forward and reverse primer occurred, false-positive results can be found on the lateral flow assay (LFA) which is one of the major detection methods widely used as a point of care diagnosis. Therefore, specific method of detecting only the target amplicon is required.In this study, a tHDA-based CRISPR/Cas12a system was developed to detect low levels of Escherichia coli O157:H7 in fresh salad mix without the false-positive results produced by primer dimers. For the comparison of the effect in eliminating false-positive results by CRISPR/Cas12a system, LFA was also evaluated. The tHDA-based CRISPR/Cas12a system detected as low as 101 CFU/mL E. coli O157:H7 in bacterial pure culture. In LFA false-positive results were produced due to the primer dimer, whereas the primer dimer produced by tHDA was not detected in the CRISPR/Cas12a system. These results indicated that the CRISPR/Cas12a system eliminated the formation of primer dimer. In fresh salad mix, the tHDA-based CRISPR/Cas12a system combined with the filter concentration method detected 103 CFU/g E. coli O157:H7.This study was the first to amplify stx2 of E. coli O157:H7 with tHDA as an isothermal amplification method and detected the amplicon without false-positive results by combining tHDA with CRISPR/Cas12a. Therefore, this study showed great potential for detecting low levels of E. coli O157:H7 present in fresh salad mix.