多孔性
材料科学
电解
阳极
电极
电解水
质子交换膜燃料电池
析氧
复合材料
图层(电子)
耐久性
化学工程
电流密度
电化学
化学
电解质
燃料电池
物理
物理化学
量子力学
工程类
作者
Noor Ul Hassan,Elaine Motyka,Jonathan Kweder,Prabhu Ganesan,Bryce Brechin,Barr Zulevi,Héctor Colón-Mercado,Paul A. Kohl,William Earl Mustain
摘要
Anion exchange membrane water electrolyzers (AEMELs) have recently received significant attention due to their potential advantages over existing commercial water electrolysis technologies. However, AEM electrolyzers have not yet met performance and durability targets. One of the critical components in achieving high AEMEL performance is the porous transport layer (PTL) which serves many critical functions in the oxygen evolution reaction (OER) electrode. In this study, several OER PTL attributes were investigated, including: material of construction, fabrication method, feature size, porosity/density, and thickness. It was found that higher porosity helped facilitate multiphase (O2, H2O, etc.) transport; however, as the porosity increased, the catalyst layer adhesion to the PTL decreased, the contact resistance with the bipolar plate increased and the cell operating voltage increased. It was found that nickel-based PTLs allowed for lower operating voltages than similarly-structured stainless steel PTLs. Improved operating voltages were achieved with both fiber felts and sintered structures by porosity optimization. Furthermore, an increase in thickness did not affect transient voltage response, however, it had a negative effect on performance stability. The experimental findings presented here provide important insights for development of PTL materials and structures for efficient and low-cost water electrolysis.
科研通智能强力驱动
Strongly Powered by AbleSci AI