薄脆饼
晶圆级封装
造型(装饰)
材料科学
晶圆规模集成
模具准备
复合材料
光电子学
晶片切割
作者
Yuki Sugiura,Daisuke Mori,Yasuhito Fujii,Kenta Imamura,Ippei Yamai,Takashi Yagihashi,Eiichi Nomura
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2024-05-28
卷期号:: 855-859
被引量:7
标识
DOI:10.1109/ectc51529.2024.00137
摘要
We report the sheet molding compound (SMC) technology to solve the wafer warpage problem that occurs after the compression molding process, which is a critical technical problem in wafer-level packaging (WLP) process. Wafer warpage is known to be caused by the mismatch of coefficients of thermal expansion (CTE) between carrier wafer and molding compound. An effective method to improve the warpage involves reducing the molding thickness, which induces thermal shrinkage volume of molding compound. Liquid molding compound (LMC) has been used in the compression molding process for WLP; however, a thin molding process with LMC causes flow marks. In this report, the relationship between flow mark and wafer warpage is studied by the difference of molding compound type, LMC and SMC, respectively and feasibility of reducing warpage by thin molding was verified with each process.
科研通智能强力驱动
Strongly Powered by AbleSci AI