材料科学
铁电性
复合材料
电介质
介电常数
纳米复合材料
填料(材料)
纳米颗粒
铁电聚合物
聚合物
纳米技术
光电子学
作者
Leontin Pădurariu,Nadejda Horchidan,Cristina Elena Ciomaga,Lavinia Petronela Curecheriu,Vlad Alexandru Lukacs,Radu Stefan Stirbu,George Stoian,Mihaela Botea,Mihaela Florea,Valentin‐Adrian Maraloiu,L. Pintilie,Aurelian Rotaru,Liliana Mitoşeriu
标识
DOI:10.1021/acsami.2c15641
摘要
The paper presents a study concerning the role of ferroelectric filler size and clustering in the dielectric properties of 20%BaTiO 3 –80%PVDF and of 20% (2%Ag–98%BaTiO 3 )–PVDF hybrid nanocomposites. By finite element calculations, it was shown that using fillers with ε > 10 3 does not provide a permittivity rise in the composites and the effective dielectric constant tends to saturate to specific values determined by the filler size and agglomeration degree. Irrespective of the ferroelectric filler sizes, the addition of metallic ultrafine nanoparticles (Ag) results in permittivity intensification and the effect is even stronger if the metallic nanoparticles are connected to a higher degree with the ferroelectric particles’ surfaces. When using coarse ferroelectric fillers, the probability of clustering is higher, thus favoring the permittivity increase by field concentration in small regions close to the interfaces separating dissimilar materials. The modeling results were validated by an experimental dielectric analysis performed in a series of PVDF-based thick films with the same amount of BaTiO 3 fillers or with Ag–BaTiO 3 hybrid fillers. Similar trends as predicted by simulations were found experimentally but with slightly higher permittivity values which were assigned to the modifications of the polymer phase composition due to the presence of nanofillers and the local sample inhomogeneity (the presence of clustering, in particular for coarse BaTiO 3 grains), which create regions with enhanced local fields.
科研通智能强力驱动
Strongly Powered by AbleSci AI