奥氏体
材料科学
板条
马氏体
冶金
无扩散变换
纳米晶材料
贝氏体
合金
粒度
微观结构
纳米技术
作者
Akinobu Shibata,Fumitaka Ichikawa,Hiroki Adachi,Tohru Yamasaki,Nobuhiro Tsuji
标识
DOI:10.1080/09500839.2017.1292057
摘要
This paper reports an investigation of martensitic transformation behaviour from austenite with various grain sizes ranging from 290 nm to 34 μm in an Fe–Ni alloy fabricated by electrodeposition and subsequent heat treatment. We confirmed that martensite morphology changed from lath to thin plate with decreasing the austenite grain size. Crystallographic orientation analysis revealed that the variants of thin plate martensite formed in the austenite with relatively coarse grains achieved self-accommodation of the transformation strain inside one austenite grain. In contrast, the transformation strain accompanying martensitic transformation from the ultrafine-grained or nanocrystalline austenite was not accommodated by the martensite variants formed in one austenite grain but accommodated cooperatively by those formed in the several adjacent austenite grains.
科研通智能强力驱动
Strongly Powered by AbleSci AI