材料科学
泥浆
抛光
钨
薄脆饼
化学机械平面化
冶金
腐蚀
氧化钨
复合材料
光电子学
生物
古生物学
作者
Sang‐Ho Lee,Young-Jae Kang,Jin-Goo Park,Pan-Ki Kwon,Chang-Il Kim,Chan-Kwon Oh,Soo-Myoung Kim,Myung-S. Jhon,Se-An Hur,Youngjung Kim,Bong-Ho Kim
标识
DOI:10.4313/teem.2006.7.4.163
摘要
The dishing and the erosion were evaluated on the tungsten CMP process with conventional and new developed slurry. The tungsten thin film was polished by orbital polishing equipment. Commercial pattern wafer was used for the evaluation. Both slurries were pre tested on the oxide region on the wafer surface and the removal rate was not different very much. At the pattern density examination, the erosion performance was increased at all processing condition due to the reduction of thickness loss in new slurry. However, the dishing thickness was not remarkably changed at high pattern density despite of the improvement at low pattern density. At the large pad area, the reduction of dishing thickness was clearly found at new tungsten slurry.
科研通智能强力驱动
Strongly Powered by AbleSci AI