串联
光电子学
材料科学
吸收(声学)
实现(概率)
太阳能电池
太阳能电池理论
钙钛矿(结构)
衰减系数
能量转换效率
光伏系统
带隙
太阳能
电流密度
电压
图层(电子)
工程物理
开路电压
钙钛矿太阳能电池
摩尔吸收率
高压
功率(物理)
等离子太阳电池
电子工程
作者
Vani Mittal,Gautam K. Burdak,Shweta Dhakla,Parvesh K. Deendyal,Sarvesh Kumar,Abdullah A. AlShaikhi,Santosh K. Mahapatra,Manish K. Kashyap
摘要
ABSTRACT Single‐junction perovskite solar cells (PSCs) have been extensively explored and developed over the past few years due to their exceptional optoelectronic properties. However, owing to the Shockley‐Queisser limit, tandem solar cells are now being explored for experimental realization and to increase the power conversion efficiency (PCE) of presently deployed solar cells. In this work, we propose a solar cell with a novel lead‐free perovskite, Ca 3 AsI 3 , as the top sub‐cell absorber layer having a band gap of 1.577 eV, a high environmental stability and high absorption coefficient, and MoS 2 as the bottom sub‐cell absorber layer of this tandem cell having a narrow band gap (1.2–1.9 eV), high absorption coefficient along with high carrier mobility, eco‐friendliness, and reduced cost. We investigated the performance parameters using numerical simulations and obtained a high PCE of 31.82% with a open‐circuit voltage (V oc ) of 2.18 V, short‐circuit current density (J sc ) of 18.59 mA.cm − 2 , and fill factor (FF) of 78.53% achieved under AM 1.5G spectrum for the optimized current‐matched configuration. These results highlight the strong potential for the experimental realization of Ca 3 AsI 3 /MoS 2 tandem solar cells, offering an environmental friendly and easy‐to‐manufacture alternative for next‐generation photovoltaics.
科研通智能强力驱动
Strongly Powered by AbleSci AI