材料科学
电极
可穿戴计算机
可穿戴技术
制作
共形矩阵
导电体
生物医学工程
电阻抗
光电子学
纳米技术
微电极
接口
接口(物质)
联锁
计算机科学
可扩展性
可伸缩电子设备
生物信号
电阻抗断层成像
稳健性(进化)
电极阵列
惯性测量装置
微流控
声学
作者
Sang‐Min Kim,Hee Jeong Jang,Kihoon Kim,Yeon-Jeong Hwang,Yu Bin Lee,Joonsoo Jeong,Sunghoon Jung,Eubin Jeong,Dongwook Han,Eui‐Suk Sung,Min‐Ho Seo
出处
期刊:Small
[Wiley]
日期:2026-03-18
卷期号:22 (27): e14966-e14966
被引量:3
标识
DOI:10.1002/smll.202514966
摘要
ABSTRACT Accurate and robust acquisition of electrophysiological signals is essential for wearable healthcare and human–machine interface applications. However, conventional wet electrodes are limited by motion artifacts and insufficient long‐term stability, while many dry electrodes lack adequate skin adhesion and mechanical compliance. Here, we present a carbon black (CB)–polydimethylsiloxane (PDMS) composite‐based dry electrode featuring a micro‐textured surface (R a ≈ 1 µm), low modulus (∼216 kPa), and strong adhesive strength (∼15.68 kPa), conformally integrated onto a stretchable metallic interconnector with an optimized serpentine geometry (235° curvature angle). This architecture achieves high performance without fabrication complexity by leveraging spontaneously formed micro‐textures to promote mechanical interlocking for robust skin adhesion, thereby ensuring low interfacial impedance (∼165.2 kΩ·cm 2 at 100 Hz) and enabling long‐term electrical and mechanical stability. To demonstrate real‐world applicability, we developed a wireless, miniaturized electrocardiogram (ECG) system integrated with an inertial measurement unit (IMU). The system achieved significantly higher signal‐to‐noise ratios (SNR) than commercial devices across diverse activities (16.82–26.19 dB vs. 4.98–13.8 dB) and maintained an SNR of 21.07 dB after 24 h of continuous monitoring. These results highlight the potential of the proposed electrode system as a scalable and practical solution for high‐fidelity, long‐term biosignal acquisition in wearable electronics.
科研通智能强力驱动
Strongly Powered by AbleSci AI