Abstract Cross-linking endows polymers with the thermal stability, rigidity, and solvent resistance required for extreme environments, yet the permanently locked networks that enable these properties inherently prohibit reprocessing and closed-loop recyclability. Herein, we report a dynamic-static coordination hybrid polyimide constructed through Cu²⁺–benzimidazole interactions within a rigid aromatic backbone, where bulky –CF₃ groups adjacent to the coordination sites create localized free volume that promotes segmental motion and enables thermally triggered bond exchange. The optimized PI–Cu50% network achieves a record-high glass transition temperature of 430°C among dynamic polymer networks, together with a Young’s modulus of 4.4 GPa, tensile strength of 128 MPa, and excellent fatigue resistance with residual strain below 0.5% after 20 cycles. Upon heating to ~ 200°C, the coordination network transitions from a quasi-static state into a dynamically adaptive state, where the elongation at break increases nearly tenfold while maintaining superior strength and stiffness. The constrained coordination environment further suppresses ion migration and dipolar relaxation, enabling low dielectric loss, a high breakdown strength of 514 MV/m, and stable dielectric performance from − 150 to 250°C. Despite its highly cross-linked character and excellent solvent resistance, the coordination network can be selectively dissociated by a competitive ligand, enabling complete recycling with over 99% tensile-strength retention after regeneration. This work establishes a dynamic-static coordination hybrid strategy that reconciles thermoset-level performance with closed-loop recyclability under extreme conditions.