材料科学
锑
开路电压
薄膜
光伏
基质(水族馆)
光电子学
异质结
纳米技术
硒化物
图层(电子)
短路
化学工程
能量转换效率
电压
光伏系统
冶金
电气工程
工程类
地质学
硒
海洋学
作者
Guangxing Liang,Yandi Luo,Shuo Chen,Rong Tang,Zhuanghao Zheng,Xuejin Li,Xinsheng Liu,Yike Liu,Ying-Fen Li,Xianhui Chen,Zhenghua Su,Xianghua Zhang,Hongli Ma,Ping Fan
出处
期刊:Nano Energy
[Elsevier BV]
日期:2020-04-22
卷期号:73: 104806-104806
被引量:217
标识
DOI:10.1016/j.nanoen.2020.104806
摘要
Antimony selenide (Sb2Se3) is a potential absorber material for environment-friendly and cost-efficient photovoltaics and has achieved considerable progress in recent years. However, the severe open-circuit voltage (Voc) deficit ascribed to the interface and/or bulk defect states has become the main obstacle for further efficiency improvement. In this work, Sb2Se3 absorber layer was prepared by an effective combination reaction involving sputtered and selenized Sb precursor thin films. The self-assembled growth of Sb2Se3 thin films with large crystal grains, benign preferential orientation, and accurate chemical composition were successfully fulfilled under an appropriate thickness of Sb precursor and an optimized selenization scenario. Substrate structured Sb2Se3 thin-film solar cells, a champion device with a power-conversion efficiency of 6.84%, were fabricated. This device is comparable to state-of-the-art ones and represents the highest efficiency of sputtered Sb2Se3 solar cells. Importantly, the high Voc of 504 mV is closely related to the reduced deep level defect density for the Sb2Se3 absorber layer, the passivated interfacial defects for Sb2Se3/CdS heterojunction interface, and the additional heterojunction heat treatment-induced Cd and S inter-diffusion. This significantly improved Voc demonstrates remarkable potential to broaden its scope of applications for Sb2Se3 solar cells.
科研通智能强力驱动
Strongly Powered by AbleSci AI