摘要
The inherent safety and potential cost-efficiency of rechargeable batteries based on aqueous electrolytes, led to their development as a large-scale energy storage option for grid applications enabling wide spread integration of renewables. In this field cost and safety are more important than energy density, which is why water based systems are a promising candidate. In recent reports, highly-concentrated electrolytes have been employed to extend the narrow electrochemical stability window of water (thermodynamically ~1.23 V) and stability windows beyond 3 V have been reported for lithium based systems [1]. Using 35 molal aqueous sodium bis(fluorosulfonyl)imide (NaFSI) solutions, we recently translated the concept to sodium-ion batteries and reported a stability window of 2.6 V on stainless steel current collectors [2]. However, all so called water-in-salt electrolytes reported to date suffer from crystallization at room temperature, which leads to premature cell failure. We developed a ternary aqueous sodium-ion electrolyte based on NaFSI which is kinetically robust against crystallization and allows long term cycling at temperatures down to at least -10 °C. Addressing the raw materials supply chain as important challenge for scaling, we developed a 2 V class aqueous sodium-ion battery employing only abundant raw materials, namely NaTi2(PO4)3 [3] and Na3(VOPO4)2F [4] on the anode and cathode side, respectively. With 64 Wh kg-1, based on the active masses of both electrodes, this battery displays an energy density that is almost twice as high as that of previously reported aqueous sodium-ion batteries [5]. The cell displays excellent cycling stability at 30 °C with capacity retention of 85% after 100 cycles at C/5 and 77% after 500 cycles at 1C. At -10 °C, we obtain capacity retention of 74% after 500 cycles at C/5. References: Suo, L. et al. "Water-in-salt" electrolyte enables high-voltage aqueous lithium-ion chemistries. Science 350, 938 (2015). Kühnel, R. S.; Reber, D.; Battaglia, C., A High-Voltage Aqueous Electrolyte for Sodium-Ion Batteries. ACS Energy Lett. 2, 2005 (2017). Li, Z.; Young, D.; Xiang, K.; Carter, W. C.; Chiang, Y.-M., Towards High Power High Energy Aqueous Sodium-Ion Batteries: The NaTi2(PO4)3/Na44MnO2 System. Adv. Energy Mater. 3, 290 (2013). Qi, Y.; Mu, L.; Zhao, J.; Hu, Y. S.; Liu, H.; Dai, S., Superior Na-Storage Performance of Low-Temperature-Synthesized Na3(VO(1-x)PO4)2F(1+2x) (0≤x≤1) Nanoparticles for Na-Ion Batteries. Chem. Int. Ed. 54, 9911 (2015). Kumar, P. R.; Jung, Y. H.; Wang, J. E.; Kim, D. K., Na3V2O2(PO4)2F-MWCNT nanocomposites as a stable and high rate cathode for aqueous and non-aqueous sodium-ion batteries. Power Sources 324, 421 (2016).