Optical Investigation of Sooting Propensity of n-Dodecane Pilot/Lean-Premixed Methane Dual-Fuel Combustion in a Rapid Compression-Expansion Machine

The sooting propensity of dual-fuel combustion with n-dodecane pilot injection in a lean-premixed methane-air charge has been investigated using an optically accessible Rapid Compression-Expansion Machine to achieve engine relevant pressure and temperature conditions at start of pilot injection.A Diesel injector with a 100 µm single-hole coaxial nozzle, mounted at the cylinder periphery, has been employed to admit the pilot fuel.The aim of this study was to enhance the fundamental understanding of soot formation and oxidation processes of n-dodecane in presence of methane in the air charge by parametric variation of methane equivalence ratio, charge temperature and pilot fuel injection duration.The influence of methane on ignition delay and flame extent of the pilot fuel jet has been determined by simultaneous OH* chemiluminescence and Schlieren imaging.The sooting behavior of the flame has been characterized using the 2D-DBI imaging methodology.The apparent soot black-body temperature has been measured 1D-resolved along the injector axis by applying an imaging spectrograph.Addition of methane into the air charge considerably prolongs the ignition delay with an increasing effect under less reactive conditions and with higher methane equivalence ratios.Therefore, the influence of methane on the formation of soot is two-fold: in case of short pilot injection, the presence of methane was found to decrease the soot formation due to the leaner pilot fuel mixture at time of ignition.For longer pilot fuel injections, methane enhances the soot production by decreasing oxygen availability and introducing additional carbon.In all cases, methane strongly defers the oxidation of soot due to the lower availability of oxygen.